Application
Fulfill the requirement of RoHS, REACH, AGEC(MOAH/MOSH)
Minimum labeling temp: 10℃
Service temp: 5℃~70℃ (24h after labeling)
Suitable for food or medicine label in conventional gloss.
Must test to confirm if used in small bottle label (diameter smaller than 30mm).
The adhesive raw materials consist of over 70% bio-based content, embodying low-carbon and eco-friendly principles to support sustainable development.
Printing and processing
Suitable for conventional printing.
Full page printing is not recommended.
Storage period and conditions
From date of manufacture: 12 months
Storage conditions: 23±2℃ & relative humidity 50±5%. Prolonged storage outside these conditions might reduce the shelf life.
Facestock
FSC Art paper, glossiness between matte & high gloss.
Adhesive
A hot-melt adhesive with a high proportion of bio-based content
This adhesive complies with FDA section 21(175.105) and can be used for non-contact labeling of food,pharmaceutical and cosmetic products.
Indicator
Initial Tack
90°Peel Adhesion （20min）
Shear
Liner
Super calendered white glassine
Statement
All the statements, tech information & recommendations are based on the tests believed to be reliable but do not constitute a guarantee or warranty. All products sold should be tested by the customer in the end-use environment to confirm compliance with the requirements of that environment and to determine which materials to purchase.
We reserve the rights of final explanation.
Download
Contact us now
